Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 136)

LCD PROGRAMMING - BATCH ENROLL DATA CHIPS

8-130

System 2 Installation / Programming Manual

Users Enrolled 0000 þþþþ

Want to Continue? [ 1 ]

Use Up to 4 Digits þþþþ

First User # [ _ _ _ _ ]

Use Up to 4 Digits þþþþ

Number of Users [ _ _ _ _ ]

Batch Enrolling Data Chips

System Status

When this Option is entered, you will be told how many user slots are enrolled and how many

users are available for programming:

Scrolling Options: Users Remaining 0413

1=Yes, 2=No

User Number

The first thing to do is enter a user number. This number uniquely identifies a user and can be

thought of as an employee number. When the user enters a code and/or Card, and this event is

printed or displayed on the LCD, it is not the code number that is displayed to identify the user

but the user number. This is for two reasons. First, if Keypads are used, it would be a breach

of security to print a user's code where unauthorized individuals may eventually see it. Second,

when using Cards or Data Chips, this number may be quite long, and take too much space to

print or display. At this point we will enter the starting user number. This will be the user

number that is assigned to the first user in the batch. The System will sequentially add to this

number for each user in the batch. For example, if user number 1 is selected and the Number

of Users is 20, user numbers will be 1 - 20.

The LCD will scroll the instructions:

Scrolling Options: 0=Quit

At the First User # [ _ _ _ _ ] prompt, enter the desired number followed by a # (enter).

Number of Users

Here you will specify the number of users you want to automatically Batch Load.

The LCD will scroll the instructions:

Scrolling Options: 0=Quit

At the Number of Users [ _ _ _ _ ] prompt, enter the desired number followed by a # (enter).

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 335 336

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 136