Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 211)

PC/VDT PROGRAMMING - ADD/CHANGE DATA CHIPS

9-205

System 2 Installation / Programming Manual

Enrolling Data Chips

In this option, you'll specify a user’s chip, the door(s) the user may access, when the user may

access these doors, which outputs will be activated, whether the user is subject to Anti-

Passback, and if the user is Permanent or Temporary.

System Status

When this Option is entered, you will be told how many users are enrolled and how many user

slots are available for programming:

Users Enrolled 0000

Users Remaining 0413

1=Yes,2=No

Want to Continue? [1]

If you wish to enroll users press 1 and ENTER.

User Numbers

The first thing to do is enter a user number, not the chip number. This number uniquely

identifies a user and can be thought of as an employee number. When the user touches a chip,

and this event is printed or displayed on the VDT, it is not the chip number that is displayed to

identify the user but the user number. Why? This number may be quite long, and take too much

space to print or display.

The VDT will display the instructions:

Use Up to 4 Digits

0=Quit

Enter User [___0]

At the Enter User [_ _ _0] prompt, enter the desired number followed by a ENTER.

If you wish to select user number 1 simply press 1 and ENTER. You do not need to enter all

four digits here. Remember, this is the user number not the Chip Number.

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 335 336

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 211