Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 153)

LCD PROGRAMMING - REPORTS

8-147

System 2 Installation / Programming Manual

1=Yes, 2=No

Delete After Show? [ 2 ]

1=Printer/VDT, 2=LCD þþþþ

Printer/VDT or LCD [ 2 ]

Program Mode

13:32:02 03/05/97

Module Reset

13:35:15 03/05/97

Delete the Events?

Sometimes you may want to look at the events and keep them for future reference, and other

times you may want to delete the events and start fresh after looking at them. The first thing

this option does is let you choose. The LCD will scroll the instructions:

At the Delete After Show? [ 2 ] prompt, enter your selection followed by a # (enter).

Choosing the Output Device

The next choice you have is to view the events on the LCD or to print them. The LCD will

scroll the instructions:

Scrolling Options: 0=Quit

At the Printer/VDT or LCD [ 2 ] prompt, enter your choice then press # (enter).

LCD

If you selected 2=LCD, the events will be displayed one at a time. To advance to the next

event, press any key. To quit, press 0 and # (enter). If the Printer is selected all events will

print on the printer.

You'll see something like:

This means that at 13:32:02 on March 5, 1997, someone entered into program mode.

This isn't all the information, when you press any key to continue, you'll see, for example:

This means that at 13:35:15 on March 5, 1997, the System Reset.

To advance to the next event, press any key. To quit, press 0 and # (enter).

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 335 336

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 153