Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 186)

PC/VDT PROGRAMMING - TIME SCHEDULES

9-180

System 2 Installation / Programming Manual

Changing a Cell

If you wish to change a “Holiday Cell” to a “Day of the Week Cell” you will see the following

prompt:

1=Yes,2=No

Change to Days? [2]

At the Change to Days? [ 2 ] prompt, choose 1 to re-assign this cell to any Day(s) of

the Week.

Trigger Time

With the DAY / HOLIDAY DATE BOX programmed, the second part of specifying when you

want something to happen is programming the TIME BOX. The VDT will display the

instructions:

This Schedule=01

This Cell=01

Enter hh:mm

Trigger Time [00:00]

At the Trigger Time [00:00] prompt, enter the desired time followed by ENTER.

Remember to use military format. This means that 8:00 AM would be entered 08:00 and 8:01

AM would be entered 08:01 - the leading zeros are important here.

If you programmed a holiday date and wish the door to remain locked, or to deny access to the

users of this schedule, leave the trigger time at 00:00. If you have programmed this cell for a

day or days of the week, enter the start and end times to unlock/lock the door or grant/deny

access to users.

If we stick with the previous example, you would program Time Cell #1 Trigger Time 08:00.

Enter 0800, you'll see:

This Schedule=01

This Cell=01

Enter hh:mm

Trigger Time [08:00]

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 335 336

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 186