Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 256)

100

101

PC/VDT PROGRAMMING - OVERRIDE OUTPUTS

9-250

System 2 Installation / Programming Manual

Override Outputs

If you chose to Override Outputs, you can now choose the output you wish to activate.

Unit Number

The VDT will display the instructions:

0=Master

1=Slave #1

2=Slave #2, etc

Enter Unit # [0]

You can select from any of the available units you may have “networked” together on the

System.

Output Number

The VDT will display the instructions:

Use 1 thru 4

1=Aux Relay 1

2=Aux Relay 2

3=Voltage Output 1

4=Voltage Output 2

0=Quit

Output [0]

Next, you will can either turn the Output On or Off.

On / Off

The VDT will display the instructions:

1=On,2=Off

0=Quit

Enter State [1]

The VDT will take you back to the Ports/Outputs selection prompt.

1=Ports,2=Outputs

0=Quit

Type[1]

To Override Outputs press 2. To exit press 0. The unit will return On-Line.

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 335 336

Kommentare zu diesen Handbüchern

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 256

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Myalarm V-LCD1