Myalarm V-LCD1 Bedienerhandbuch PDF herunterladen (Seite 281)

LCD MESSAGES

B-275

System 2 Installation / Programming Manual

APPENDIX B

LCD MESSAGES

AC Off = AC power loss.

AC On = AC power restored.

AP Error = Anti-Passback Error. Someone attempted to go in a door using their

code / Card before using it at an exit door.

Auto Aux On = An auxiliary relay was automatically triggered On from a Time

Schedule.

Auto Aux Off = An auxiliary relay was automatically triggered Off from a Time

Schedule.

Auto Output = On, An output was automatically triggered On from a Time

Schedule.

Auto Output = Off, An output was automatically triggered Off from a Time

Schedule.

Comm Int 1 = The communications to “small processor” #1 has failed. If this happens,

it is most likely due to a power surge or possible lightning strike.

Comm Int 2 = The communications to “small processor” #2 has failed. If this happens,

it is most likely due to a power surge or possible lightning strike.

Daylight Savings = Daylight Savings Time was activated.

Door Ajar = A door is being held open.

Door Closed = The door which was ajar closed.

Door Perm = Door Permission Error. A person attempted to enter a door in which

they did not have permission to enter.

Duped Slave = Two or more slaves are configured with the same slave number.

Expired User = A temporary user code has expired.

Forced Entry = A door has been forced open without a valid code or card entry.

Inv = An invalid card was used at a door.

Inv Code = An invalid code was used at a door.

1 2 ... 276 277 278 279 280 281 282 283 284 285 286 ... 335 336

Keine Kommentare

Myalarm V-LCD1 Bedienerhandbuch Seite 281